Guides
Practical guides
The first practical article in this guide is about preparing for your very first session in a headset. That evening is when small mishaps happen most often: a knocked-over lamp, a tangled cable, a cat underfoot, a blurry picture because the straps were not adjusted, or dizziness after too lively a start. Almost all of this can be avoided in a short time if you prepare in advance. Below, step by step, is how to clear the room, set up the play-area boundary, put on and adjust the headset, choose a calm start and remember to take a break. The advice is general and suits most headsets; check the manufacturer's instructions for details about your own device.
The most useful headset setting is not made in a menu but by hand: moving the armchair, picking the cable up off the floor, closing the door on a curious cat. A well-prepared room goes unnoticed, and that is exactly why it feels calm.
What to do in advance
- Read the manufacturer's instructions for your headset, especially the section on safety and age limits.
- Charge the headset and controllers so that setup is not interrupted halfway through.
- Choose a room with a clear area of floor where nobody will walk in without warning while you play.
- Agree with your household: while you are wearing the headset, nobody comes up behind you or leaves things on the floor.
- Have a dry, soft microfibre cloth ready for the lenses and a glass of water on a table outside the play area.
Clear the floor and move fragile things
Move chairs, the coffee table and the floor lamp aside, and pick up bags, toys and extension leads from the floor. Fragile objects on shelves near the edge of the area are best moved further away: once absorbed, people reach out further than they expect.
Hypothetical example: you push the armchair towards the window, clear a child's building set off the rug and move a vase from a low cabinet onto the wardrobe.
Check the lighting and windows
Headsets that track the room with cameras need even, soft light. Direct sunlight interferes with tracking and should never get into the lenses, so draw the curtains, and cover large mirrors if you can: reflections confuse the sensors.
Hypothetical example: during the day you draw a thick curtain and switch on the ceiling light, and you drape a blanket over the mirrored wardrobe door.
Set up the play-area boundary
Following the headset's prompts, trace the clear area of floor with a controller, leaving a margin from furniture and walls. If space is limited, choose a mode for playing standing or seated in one spot.
Hypothetical example: you trace a rectangle between the sofa and the wardrobe, staying an arm's length away from each object, and then check that the boundary grid appears in time.
Route the cable
If the headset connects to a computer or console by cable, route it so that it runs behind you or overhead and does not lie in loops under your feet. A standalone headset skips this step, but it is still worth thinking about any other cables in the room.
Hypothetical example: you run the cable from the computer behind you and hook it onto a ceiling hook so that it hangs from above and stays out from under your feet.
Adjust the straps and lenses
Put the headset on starting from your forehead, then tighten the side and top straps so it does not slip but does not press either. Adjust the distance between the lenses: the image should be sharp across the whole view. If you wear glasses, check that they fit under the headset and do not touch the lenses.
Hypothetical example: at first the menu text looks doubled, you move the lenses closer together, and the text becomes sharp.
Start seated with an unhurried scene
Spend the first few minutes on a chair inside the play area, in a calm app where you barely move. This makes it easier to get used to the feeling of immersion and to see how the picture responds to your head movements.
Hypothetical example: you sit down and simply look around a virtual gallery, turning your head and studying the paintings up close.
Take a break and listen to your body
After a short while, take the headset off, sit for a bit, drink some water and look around the room. If you feel unwell, dizzy or your eyes are tired, that's enough for today. If you still feel unwell, see a doctor.
Hypothetical example: after the first scene you take the headset off, notice slight eye fatigue and decide to continue tomorrow.
Tidy up the headset
After playing, wipe the face cushion, and clean the lenses only with a dry, soft cloth, never with liquids. Put the headset in its case or lay it lenses-down in the shade, away from the window.
Hypothetical example: you wipe the cushion with an alcohol-free wet wipe and the lenses with dry microfibre, and put the headset on a shelf in the wardrobe.
Common mistakes
- Starting to play without tracing the boundary, on the assumption that “I remember where the table is”.
- Leaving the cable in a loop underfoot and stepping on it every time you turn around.
- Going straight for fast flights and racing instead of a calm scene.
- Holding out until the end of the level when you already feel dizzy, instead of taking the headset off.
- Using the hem of a T-shirt, a paper tissue or glass cleaner on the lenses instead of dry microfibre.
- Leaving the headset on a windowsill or a table in direct sunlight.
Other options
- If you are short of free space, choose apps you play seated and set a stationary boundary in the settings.
- If several people at home share one headset, get spare face cushions or protective face covers.
- If you want to try immersion without a headset, start with augmented reality on a phone screen.
- If small children or pets are around, play when another adult is in the room to keep an eye on the play area.
Check yourself
- The floor in the play area is clear and fragile items are put away.
- The curtains are drawn, sunlight is not falling on the lenses and mirrors are covered.
- The boundary is set with a margin from furniture and walls.
- The cable is not lying underfoot.
- The headset fits snugly, the picture is sharp, and my glasses do not touch the lenses.
- The first session is short and calm, and I take a break afterwards.
- The cushion is wiped, the lenses are cleaned with a dry cloth and the headset is stored in the shade.
Article catalogue for English-speaking readers
Over time, this catalogue will fill with standalone articles on virtual and augmented reality written for English-speaking readers: setting up a play area in a small room, working out in a headset, virtual tours and how to explain play-area rules to a child. Each article will focus on a single question and end with a short list of things to check.
- ROB RUN Services: Comparing Squad and Solo Help
Group or lone-wolf ROB RUN player? How the choice shapes the kind of outside help that makes sense, how to prepare a session and how to agree on a result.
- GTA 6 Money Systems and Economy Explained: Practical Guide
Two wallets, one confirmed: a careful look at what Grand Theft Auto VI costs, what earlier games suggest about its economy and how to sort rumors.
- Common questions about ARC Raiders news, guides and game resources: Competitive Play
Answers to common questions about ARC Raiders news, guides and resources for competitive play: which sources to trust, how to judge a guide and the risks.
- Aion2Boost brand & Aion 2 player resources: Practical Overview for Players
A stage-by-stage overview of Aion 2 player resources, from installing the client to group content and PvP, with neutral context on the Aion2Boost brand.
- Gaming Resources And Editorial Discovery: Practical Strategy
A FAQ and checklist on spotting game information that is current and trustworthy, with MMO, shooter, MOBA, extraction and mobile examples and criteria.
- ARC Raiders: Blueprint Hunting, Loadouts and Survival Decisions — Comparing Common Approaches #1
A resource roundup for ARC Raiders: which reading helps with blueprint hunting, loadouts and exit calls, compared shelf by shelf, plus a checklist.
What we are working on
- How to set up a play area when you have very little free space.
- How standing, seated and stationary play modes differ.
- How to prepare a headset that several family members share.
- How virtual tours work and what to look at first.
- How to warm up before active apps and why breaks matter here too.
Editorial rules
- Articles in this catalogue are written separately for each language version and are not translations.
- Some articles link to third-party websites, including gaming services; we do not control their content, prices or terms.
- We sell nothing and do not publish advertising, ratings, prices or reviews.
Read next
- Sections
A map of the guide: how headsets and controllers work, safety and comfort, care and hygiene, and uses in learning, museums and sport.
- Questions
Short answers about how a headset works, motion tracking, breaks and feeling well, and how to clean the lenses and the face cushion.
- Reference
A beginner's glossary: headset, lens, refresh rate, field of view, degrees of freedom, controller, boundary and the kinds of reality.
- PC VR headset (Russian only)
How a headset that connects to a computer or console works, how it differs from a standalone one and what to check when trying it on.
Sources
- VR headset manufacturers' instructions on play-area safety (in general terms)
- Editorial materials of this guide
Headsets, controllers and tracking systems are described here in general terms: individual models differ, and the instructions for your own device always come first. This guide does not give health advice: if you feel unwell in a headset, take it off and rest, and if you still don't feel right, see a doctor.